The polished edges of the glass hug the curve of the solid wood spheres that push in from both sides. A gentle, playful nod to hands on hips.
Condition: As pictured. Sold as-is; final sale.
Oak
Width: 26” / 66 cm
Height: 24” / 61 cm
Depth: 3” / 8 cm
Weight: 16 lb / 7 kg
Materials: Solid wood, clear glass mirror
All RTH mirrors include mounting hardware. When your mirror arrives, one of the two brackets will already be attached to the back of the mirror. Install the second bracket on your wall using these steps:
1. Find the desired placement for your mirror on your wall. Mark the wall with tape at the center bottom edge.
2. On the back of the mirror, with both mounting brackets interlocked, measure the distance from the bottom edge of the mirror frame to the bottom edge of the bracket.
3. Place the bottom edge of the bracket on your wall the same distance from the tape that you found in the last step.
4. Use the screws and anchors provided to mount the bracket to drywall. Start with the center screw, then use a level to straighten the bracket before adding the remaining screws.
5. Lift the mirror approximately 2" (5 cm) above the tape on your wall, and gently lower the mirror until both mounting brackets interlock.
6. Peel away the tape and enjoy.
Spray glass cleaning solution onto a microfiber cloth before wiping the glass. Do not spray the cleaning solution directly onto the mirror.
For best results, wipe the glass a second time with a clean, dry microfiber cloth. This helps to eliminate streaks.
To clean the frame, use a duster or dry microfiber cloth. If deeper cleaning is required, lightly dampen a cloth with water and gently wipe the frame.
Never use chemical cleaning solutions on the frame.
It Pays to Be on the List.
Join our newsletter for access to our secret sale, with 15% off selected pieces.