Installation Modal

INSTALLATION

All RTH mirrors include mounting hardware. When your mirror arrives, one of the two brackets will already be attached to the back of the mirror. Install the second bracket on your wall using these steps:

1
Find the desired placement for your mirror on your wall. Mark the wall with tape at the center bottom edge.

2
On the back of the mirror, with both mounting brackets interlocked, measure the distance from the bottom edge of the mirror frame to the bottom edge of the bracket.

3
Place the bottom edge of the bracket on your wall the same distance from the tape that you found in the last step.

4
Use the screws provided to mount the bracket to drywall. Start with the center screw, then use a level to straighten the bracket before adding the remaining screws.

5
Lift the mirror approximately 2" (5 cm) above the tape on your wall, and gently lower the mirror until both mounting brackets interlock.

6
Peel away the tape and enjoy :)